Cone 5 vs. Cone 6 — Spinning Pots

Using a cone while firing pottery creations is relatively unknown, especially for those using the pottery kiln for the first time. Interestingly, the kiln works not on temperatures but at a cone level! You can create more durable work when you know the proper cone levels based on the piece’s time and firing. It is more of a heat absorption technique than increasing or decreasing the temperature.

Cones are available in a range of numbers. Now, each of these cones corresponds to the temperature and heating rate combination that might cause the deformation of the cone. When the firing process starts, the cone stands at an angle of 8 degrees. When fired perfectly, the cone will achieve an angle of 90 degrees. Check whether the cone has less bending. If it does, the pottery piece is under-fired. If the angle surpasses the 90-degree mark, it states that the pottery work is over-fired.

Now, take a look at the numbers in these cones. The hottest cone is numbered 10 while it gets cooler, with 1 being the lowest temperature. However, 1 isn’t the coolest. It continues with 01, 02, and so on.

So, how does Cone 5 differ from Cone 6? Let us check it out!

Technically speaking, there is only a little difference between cone 5 and cone 6. Even the temperature difference between the both is minor. While cone 5 fires at 2118…